Ultramax UXDC16 Скачать руководство пользователя страница 2

Страница: 2 / 4

Step 6 Remove protective file from Caseback LCD Display

Step 7 Remove protective films from Lensport before starting to take photos

underwater

HOUSING CARE AND MAINTENANCE

1. Rinse housing thoroughly with fresh, clean water after each use. Be sure to rinse buttons well as salt residue will cause buttons stick.

2. Check both O-Rings on housing front and case back every time housing is opened or closed to ensure they are clean and free of debris,

3. Keep O-Rings lightly lubricated with Silicone Oil.

4. Do not try and remove inner O-ring housing front unless replacing it. Inner O-ring is glued in.

5. Store housing in open, unlocked position so O-ring does not flatten.

6. Store in a cool and dry place.

7. Remove batteries from camera when storing

Содержание UXDC16

Страница 1: ...housing and gently install camera insert external memory card here if needed make sure the camera is firmly seated Step 4 Gently close back of housing DO NOT FORCE Step 5 Turn swivel locking knob cloc...

Страница 2: ...s salt residue will cause buttons stick 2 Check both O Rings on housing front and case back every time housing is opened or closed to ensure they are clean and free of debris 3 Keep O Rings lightly lu...

Страница 3: ...camera flash window Step 3 Plug the Optic Cable Jacks into the connector holes Step 4 Connect the other end of the Optic Cable Jacks to your external flash NOTICE IF ONLY SINGLE EXTERNAL FLASH IS USED...

Страница 4: ...inal purchaser purchased from ULTRAMAX s authorized dealers or official ULTRAMAX website online store Proof of Purchase must be included with all warranty returns To obtain warranty service contact UL...