14
w
w
w
.ul
tral
u
x.
bg
CONNECTION
CABLE CONNCTION
The connection is via an XLR
connector at one end and
an XLR connector at the
other end.
CAUTION:
Do
not
allow
contact
between the grid ground
wire and the fixture’s
chassis ground. Grounding
the ground can cause a
ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify positive pole and
to make sure the pins are not grounded or shorted to the shield or each other.
MOUNTING
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without any
deformation. When installing the unit must be secured with a secondary safety attachment, e.g. and appropriate
safety cable. Never stand directly below the unit when mounting, removing,
or servicing the unit. Overhead mounting requires extensive
experience, including calculating working load limits, installation
material being used, and periodic safety inspection of all
installation material and unit. If you lack these qualifications, do
not attempt the installation yourself. The installation should be
checked by a skilled person once a year. To avoid internal damage
to the unit, never mount the unit on its side as illustrated above.
Be sure this fixture is kept at least 0.5m away from any flammable
materials
(decoration etc.). And you’d
better use and install the
supplied safety cable as a safety measure to prevent accidental
damage and/or injury in the event the clamp fails.
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
•
The product and its components are not harmful to the environment
•
Please dispose the package elements separately in containers for the corresponding material.
•
Please dispose the broken product separately in containers for out of usage electrical equipment.
