Ultrak TVC-500, Руководство по установке

Страница: 15 / 16

15
TROUBLESHOOTING AND MAINTENANCE
2.1 TROUBLESHOOTING
If problems occur, verify the installation of the camera with the
instructions in this manual and with other operating equipment.
Isolate the problem to the specific piece of equipment in the
system and refer to the equipment manual for further information.
Problem Possible Solution
No Video 1. Verify power to all pieces of equipment
in the system.
2. Verify that the power switches are in
the ON position.
3. Verify that the lens cap has been
removed from the lens or that the iris
of the lens is open.
4. Verify that the shield wires on the
video coaxial cable are not shorted to
the center conductor of the cable.
Video, but no control
1. Power down the system for one
minute , then turn power back ON.
2.2 PREVENTIVE MAINTENANCE
Preventive maintenance allows detection and correction of minor
faults before they become serious and cause equipment failure.
Every three months, perform the following maintenance:
a) Inspect all connecting cables for deterioration or other
damage.
b) Clean components with a clean damp cloth.
c) Verify that all the mounting hardware is secure.