background image

CARE OF YOUR STOPWATCH 

 

*WATER-RESISTANCE 

The stopwatch is designed to withstand accidental contact with water such as 

splashes or rain, but it is not designed for use in water.    Do not operate the buttons 

when the stopwatch is wet. 

 

*TEMPERATURE 

Do not leave your stopwatch under direct sunlight or in very high temperatures for a 

long time, or the display may become black.    Do not leave your stopwatch in very low 

temperature as this may cause a slight time loss or gain and the change of digits 

becomes slow.    In both cases the above conditions will be corrected when the 

stopwatch returns to normal temperature. 

 

*SHOCKS 

Be careful not to drop your stopwatch or hit it against hard surfaces as it may cause 

mechanical damages. 

 

*STATIC ELECTRICITY

 

The integrated circuit in your stopwatch can be affected by static electricity.    If the 

static electricity is very strong a permanent damage can occur.    Be careful of the 

screen of the TV set and the wearing of clothing made of synthetic materials in dry 

weather; in such cases a very strong static electricity can be generated. 

 

*MAGNETISM 

Not affected. 

 

*CHEMICALS 

Do not expose your stopwatch to solvents such as gasoline and alcohol, spray of 

cosmetics, cleaners, paints etc as they may cause damage to the stopwatch. 

 

 

 

 

 

 

 

 

Содержание 499


















Отзывы: