Step 10. Install Mounting Strap (#60)
UltraHD 4-Door Locker Cabinet (Model No. 20297, 20298, 20299)
*NOTE: We recommend using TWO people to assemble the cabinet.
A. Remove 1 pc Screw F (#41) from the back
corner protection.
B. Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo
shows, and using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit,
insert the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap
(#60) to the wall using Screw M (#55) and Washer
(#27-B).
Repeat steps A through D to install the other
mounting strap.
#55-A
#60
#27
#61
#55
#27-B
Step 11. Stack up and down installation mode
`
Repeat step 1-10 assemble another cabinet, If stacking
is needed, do not need install Leveling Feet in step 4.
1. Remove four rubber plugs (A) from the bottom
top.
2. Align upper and bottom Cabinet ,line up screw
holes, use 4 pcs (#50) screws I (M6X15L) to
tighten, from top of bottom cabinet to bottom of
upper cabinet .
#50
A
8
