UltraHD 20162, Руководство по сборке

Страница: 14 / 16

Step 14: Install Mounting Strap (#60)
• Lightly wipe with warm water and clean microfiber
cloth
• Always wipe in the direction of the surface grain
(NEVER ACROSS)
• Wipe away excess water with dry clean cloth
UltraHD® Stainless Steel Care Instructions
The stainless steel is protected with UltraGuard®
fingerprint resistant finish.
DO NOT use traditional stainless-steel cleaners. To
safely manage unwanted fingerprints and prevent
new stains, perform the following steps once
monthly:
UltraHD® Tall 30 in. Storage Cabinet (Model No. 20162, 20163)
*NOTE: We recommend using TWO people to assemble the cabinet.
1) Remove 1 pc Screw F (#41) from the back corner
protection.
2) Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo shows
using Screw O (#61) and Washer (#27).
3) Drill a hole in the wall with a 5/16" drill bit, insert
the Wall Anchor (#55-A) into the hole.
4) Attach the other end of the Mounting Strap (#60)
to the wall using Screw M (#55) and Washer (#27-B).
Repeat steps A through D to install the other
mounting strap.
13
Installing Wheels ( WEB128 )
*Sold separately on SevilleClassics.com . Requires 2 pairs.
Step 1: Follow the previous instructions to Step 9 .
DO NOT install Leveling Feet (#6).
Step 2: Install 2 pairs of wheels ( WEB128 ) to the
bottom of the cabinet. Use screws included with
wheels to fasten.
WEB128