2
Dear Customer
Thank you for choosing a Pergola.
Please take a few minutes prior to installation to familiarise yourself with this guide.
For Technical Support please call 0843 208 6930 or email
INTRODUCTION
CONTENTS
Contents, Overview and Specification
page
2
Tools and general points
page
3
Pre-installation checks
page
4
Overview
page
4 - 5
Pergola installation steps
page
6 - 8
Pergola Components
page
9
Handling aluminium products
page
1 0
Cleaning and maintaining powder coated aluminium products
page
11
- Guidance for homeowners and fitters
Easy to install with virtually no on-site cutting or
wastage the PERGOLA is a complete solution.
Designed as both a car port or patio cover the
PERGOLA product is pre-fabricated in 9 size
options to provide a perfect solution for every
customer. The unique curved Pergola beam
is constructed from powder coated aluminium
and acts as an integral gutter and support
beam. Aluminium posts are part of the structural
support package – these also fulfil the function
of a rain water pipe.
Overview
• Pergola supplied unglazed for use with 6mm toughened glass for 0.6 snow
load areas - all other areas use 10mm.
• One combi post/rainwater pipe per Pergola - position is always from right hand
corner viewed from outside. Posts sit ‘inboard’ of each end by 200mm.
• 7.5°
pitch
• Support posts are 2,900mm long - see p3 to calculate how to set out posts.
• Two colours / finishes - White (RAL 9003 80% Gloss) and Grey (RAL 7016,
textured)
Specification
