Procedure 2
12
8mm
8mm
Elevator
升降舵
Aileron
副翼
CG at 75mm: 8-10mm Exp:50
CG at 90mm: 5-7 mm Exp:50
Min:20
0
Max:30
0
Exp:50+
This Ultrafly F-16 is a very agile & sensitive model. In your first test flight,we
recommend you to set the CG at 75mm after the LE as the graphic above.After you
have tirmmend the model properly, you may move the CG backward which will
increase the sensitivity on elevator and may perform more aggressive maneuvers.
90mm is the ultimate performance CG point. But you also have to lower down the
elevator displacement as described in the above graphics. Please pay attention on the
below subjects for pitch sensitivity issues:
1.Loosen elevator linkage
2.Too much elevator displacement trim
3.Elevator servo neutral position problem
CG & CONTROL SURFACE SETTING
CONTROL SURFACE SETTING
CG
CG
75~90mm
