8
Installation Procedure
Installation Procedure
WARNING:
The label on the alarm must not be removed as it shows
important information about the product.
1.
Check the desired installation position for wires, pipes or other
obstructions that would be dangerous to drill into.
2.
Hold the baseplate against the ceiling at the
desired installation position.
3.
Mark the installation holes with a pencil.
4.
Drill the two installation holes as previously
marked using a 5mm diameter drill bit.
5.
Stirke the two included plastic rawl plugs into the
holes with a hammer.
6.
Align the baseplate to the plastic rawl plugs and
fix in place using the provided screws.
7.
Fit the batteries into the alarm (please note the
battery polarities).
8.
Follow the instructions in the radio-Interlink
section.
9.
Line the alarm up to the baseplate and turn the
alarm head clockwise, until securely attached.
10. After mounting, test the alarm as described in
the Maintenance section.
