ultracomfort Stellar Comfort UC550-L, Инструкция пользователя и гарантия

Страница: 14 / 24

14
Chair Operation Model UC470 BHV, UC480 BHV
The PWR button needs to be turned on to activate all the functions of
the hand control.
To turn the power on to the hand control, press the PWR button at the top
of the hand control. The PWR button will glow green. To turn off the power
to the hand control, press the PWR button again. PWR button will glow blue.
Activating the hand control starts a 20 minute timer. To restart the timer after it
shuts off, press the PWR button again. Lights will dim to conserve energy after
about 10 seconds of non use.
Power Lock out
To lock the hand control, press and hold the PWR button for 4 seconds. The
button will glow red.
To unlock the hand control, press and hold the PWR button for 4 seconds. The
button will glow blue. After unlocking the hand control, you will need to press
the PWR button to turn on the power to the hand control.
To recline your chair or lower it from the lift position, press the down
arrow and hold until you reach your desired position. Then release the button.
To return to a seated position from recline or to lift your chair to a
standing position,
press the up arrow and hold until you reach your desired
position. Then release the button.
Model UC470 BHV, UC480 BHV heat and massage operation
Press the MSG button to turn on the vibrators. Press the MSG button
again to turn off the vibrators.
Press the Heat button to turn the heating pad on.
Press the heat button again to turn off the heating
pad.
The heat and massage work independent of each other
and can be used separately or together and are factory
set to turn off in 20 minutes. If you desire an additional
20 minutes you will need to press the buttons again
to reactivate the heat and/or massage functions. Heat
and vibration turn off when the up and down arrows are
activated. Heat and vibration resume when the up and
down arrows are released.
Note: Your power lift chair can be stopped at any
time during lift or recline by releasing the selected
button. The motor is set to shut off when it reaches its fully extended
or fully retracted position if the selected button is not released. If you
should go past your desired position, select the button to bring you back
to your desired position. You can repeat the process as often as you like.