NVR with 8 cameras (P2P + TCP/IP)
In the case of over 4 cameras are in the network, and the user wants to assign certain 4 cameras to the NVR,
use P2P connection for the 4 cameras on LAN 1~4, and TCP/IP connection for the other 4 cameras in the
network.
Connect 4 cameras to LAN 1~4.
Plug power to the other 4 cameras and connect them to a switch/router.
Connect NVR to the switch/router.
Set channel 1~4 to P2P connection (default).
Change the connection type of channel 5~8 from “Disable” to “TCP/IP”.
Setup connecting IP for channel 5~8 in the connection type section.
Channel 1~4 will connect to the cameras on LAN 1~4
Channel 5~8 will connect to the cameras connected to the switch/router following the IP setting..
*
In the case of not using DC adaptor for the cameras connected to switch/router, the switch/router must
support
24V POE power supply
.
