![Ultra UX9 Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/ultra/ux9/ux9_user-manual_3383593019.webp)
-
Hide ID:
hide own number while calling (with service provider’s support).
-
Send
ID
: show own number while calling.
Call
waiting
: this network service informs you when someone is trying to reach you
while you are on another call. Select to activate or deactivate the function. Select
Query status to show the current status.
Call
divert
: this network service reroutes incoming calls to a phone number that you
specify.
-
Divert
all
voice
calls
: divert all voice calls.
-
Divert if unreachable
: divert calls when you are not in an area covered by your
service provider or when your phone is switched off.
-
Divert
if
no
answer
: diver calls when you do not answer the phone.
-
Divert
if
busy
: diver calls when you are on another call.
-
Divert all data calls
: divert all data calls.
-
Cancel
all
divert
: cancel all call diverting options.
Call
barring
: this network service allows you to restrict your calls.
-
Outgoing
calls
All calls
: prohibit all outgoing calls.
International calls
: prohibit international calls.
International except home
: only allow calls to numbers within the current
country when you are abroad, and to your home country.
-
Incoming
calls
All calls
: prohibit all incoming calls.
When roaming
: prohibit incoming calls when you use your phone outside of
your home country.
-
Cancel
all
: cancel all call barring settings, allowing to be sent and received
normally.
-
Change
barring
password
: change the call barring password obtained from your
service provider.
Line Switching
: switch between line 1 and line 2.
Closed User Group
: switch off the User group function.
IP Number
: You can set 3 IP dial numbers. Select one and press
Options
to the
following operations:
-
Activate
: active the number. If choose IP dial while dialing, the phone will add the
IP number on the front of the number.
-
Edit
: input or edit the IP number.
II.
SIM2/UIM CALL SETTINGS:
The operations are same with SIM1 call settings. UIM call setup only have three
menus which are Call Waiting, Call Divert and IP Number.
III.
CALLER TIME DISPLAY:
Set whether to have call time display.
IV.
CALL TIME REMINDER:
Set whether to have minute reminder at end of each minute during calling.
V.
BLACK LIST:
You can set at most five commonly used numbers as the black list number. Press
Ok
to
access the following options:
Mode:
press Left soft key to turn on or off the function. If turn on the function, the
Содержание UX9
Страница 33: ......