UF14000
UF14003
UF14005
UF14007
Installation/Installation/Instalación
Revised 4-2018
Revised 4-2018
Press the button of the quick connector
and connect it with the hose.
5
3
Install washer, gasket and mounting nuts
onto the shank to cover the mounting
hole.
Tighten the mounting nut.
Remove the quick connector.
1
Install the faucet through the mounting
hole.
2
7a
Turn on the handle and press the spray
head button at the position as the arrow
shown , check for the spray function.
This position is for bubble water.
Use supply hoses (not included) to
connect the cold and hot copper inlets
to angle valves. Use wrench to tighten
the coupling nuts.
Turn on water supplies and check all
connections for leaks.
6
Press the spray head button at the
position as the arrow shown , check for
the spray function.
This position is for spray water.
7b
Fasten the weight to the stretching hose
with screws, and then install the quick
connector on the outlet pipe.
4
