Use a measuring tape to find the
right location for your installation.
Use a level to mark (2) hole
locations 4” apart.
Use a 1/2” drill bit to expand the
pilot holes.
Fold the wings and insert the anchor
through the wall until wings open
Use a stud finder to map out stud
locations.
Using an 1/8” bit, drill two pilot holes
at the marked locations.
Insert a bolt through the PEG &
anchor wings (closing toward the
PEG).
Keep tension on the bolt head while
securing the PEG to the wall.
STEP
01
STEP
03
STEP
05
STEP
07
STEP
02
STEP
04
STEP
06
STEP
08
INSTALLATION
INSTRUCTIONS
4” Apart
