Please visit
www.ultraseat.com
for more information regarding this product.
J 8 0 0 I N S TA L L AT I O N G U I D E F O R A C AT E X C AVAT O R
STEP 1
Remove the 2 screws indicated in
the picture below to remove the seat
cushion.
STEP 5
Once the seat frame is mounted to the
slide rails then slide the seat cushion
back onto the frame making sure you
lift on both seat tilt and height levers.
To slide the seat cushion back onto the
frame you must line up the plastic guides
to the slots in the bottom of the seat
cushion (all 4 locations).
NOTE: After the seat cushion is
installed on the frame the 2 screws
removed under the seat frame at the
beginning (step 1) must be reinstalled.
Make sure the seat/slide rails are
moved all the way back.
STEP 3
Find the correct mounting holes that match your suspension/
rails. (Holes 1, 2, 3 & 4 are EXAMPLES ONLY)
STEP 4
Attach the seat frame to the top of your suspension.
STEP 2
Once the 2 screws are out, lift up on
both the seat tilt and height levers and
slide the seat cushion away from the
frame (towards you) and lift off seat
cushion..
1
2
3
4
4
3
2
1
First Hole
Group Number
Side to Side
Front to Back
124 3926
14-3/8” (365mm)
11” (280mm)
164 0503
14-3/8” (365mm)
11” (280mm)
229 9077
14-3/4” (375mm)
11” (280mm)
240 5063
14-3/4” (375mm)
11” (280mm)
