Ultra-tow 57762, Руководство пользователя

Страница: 10 / 28

Page 10 of 28
Part Description Qty. Part Description Qty.
16 Hinge Bracket 2 40 Cooler Rack 1
17 Gas Spring 2 41 Mounting Plate 2
18 Snap Latch 2 42 Latch 1
19 Body Bracket 2 43 Stand 1
20 Lock Bracket 1 44 Bumper 1
21 Key 2 45 Bolt (M8 x 20) 2
22 Spring Plate 2 46 Latch Spring 1
23 Bolt (M6 x 20) 12
Assembly Instructions
⚠
WARNING

Beams have sharp edges. Wear work gloves to prevent cuts on hands and fingers.

Wear ANSI Z87.1 compliant safety goggles.
NOTE:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this trailer. If there is no female
plug for the wires, have one installed by a qualified service technician.

For additional information regarding the parts listed in the following pages, refer to the Parts List and
diagram.

It is recommended that only a qualified technician perform the electrical service that may be needed
to enable your particular make/model vehicle to power the trailer’s 12 volt DC lighting system.
1. Place the trailer body (1) upside down, as shown in Figure. A.