Page of 4
3
This jack is designed for vertical loading. Excessive side forces may cause failure and or injury.
Before moving trailer crank jack to its lowest position.
These jacks are not designed for round tongues.
Do not modify the jack in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment. There are specific applications for which the
jack was designed.
The swivel is very strong. However abuse, corrosion or damage may cause swivel to break.
Regularly inspect the swivel for damage and discontinue use if the swivel is damaged.
Store idle jack. When jack is not in use, store it in a secure place out of the reach of children.
Inspect it for good working condition prior to storage and before re-use.
SAVE THESE INSTRUCTIONS
ASSEMBLY
1. When mounting trailer jack it is best to hook up to
the tow vehicle to make sure trailer is secure.
2. Mount jack based on drawing at left. All welding
must be performed by a certified welder.
3. Place male tube mount so one of the four pin holes
are facing up and perpendicular to the trailer frame.
4. Weld on entire surface where male tube meets
trailer frame with 3/16" fillet weld.
5. After jack is mounted to trailer, attach the handle
assembly to jack with bolt fastener provided.
OPERATION
1. To activate the swivel function on the jack pull the pin and swivel jack into desired position.
2. Only swivel jack when trailer is securely attached to a tow vehicle. Make sure pull pin is properly
engaged after swiveling into desired position.
3. Make sure swivel pull pin is properly engaged after swiveling into desired position.
MAINTENANCE
•
Maintain your Jack.
It is recommended that the general condition of any jack be examined
before it is used. Keep your jack in good repair by adopting a program of conscientious repair
and maintenance. If jack is damaged, discontinue use of the jack.
•
This jack is pre-greased for easy operation. This jack however includes a grease zerk for easy
lubrication as needed.
Weld shown