Ultra Start RFK4BAM, Руководство по установке

Страница: 9 / 10

TM TM
ultrastarters.com
REV.09/20/18
INSTALLATION
GUIDE
MODEL
DATA-AM & DEI (4X10/5X10)
DATA AM
CONNECTIONS
PROGRAMMING
PROGRAMMING REMOTES
1 . Follow programming guide to program remotes.
2 . There is no other programming required for operation.
PROGRAMMING
MODULE
DATA PROTOCOL : TYPE 4 - D2D
1 . Open “XK Loader”
2 . Choose Year / Make / Model
3 . Configure Module features
4 . Enable “SMART START” without RF
5 . Flash Firmware
RF CONN 2
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
Turn the
Ignition ON then
OFF 2x leaving it in
the ON position at
the 2nd time.
Press and release the
programming button on
the antenna 2 times.
The LED will flash
1x then 2x.
Turn the
Ignition OFF
to exit
programming.
Press and hold for 3 seconds
until LED flashes turns on
solid. Release programming
button.
Press the button on
each transmitter. LED
on antenna will flash 1x
for each remote
programmed.
D
A
T
A
A
M
2X
D
A
T
A
A
M
x1
2X
ANTENNA IN
All manuals and user guides at all-guides.com