TRANSMITTER PROGRAMMING
Passive / Active Arming
Lock-Unlock-Lock-Unlock
Passive
Active
Passive / Active Locks
Unlock-Trunk-Unlock-Trunk
Passive
Active
Ignition Aouto Door Locks
Lock-Trunk-Lock-Trunk
ON
OFF
Door Lock Pulses
Lock-Unlock-Trunk-Lock
Three Second
.75 Second
Double Pulse
Unlock-Trunk-Unlock-Lock
Double Pulse
Single Pulse
Passive Warning Chirps
Lock-Trunk-Unlock-Trunk
ON
OFF
Reset To Factory Defaults
Trunk-Lock-Unlock-Trunk
Three flashes
Three Flashes
METHOD 1
1)
Turn the ignition
On-Off-On-Off-On-Off-On-Off.
The park lights will flash
twice.
2)
Press the Lock button on the transmitters to be programmed.
3)
The park lights will flash once, each time a new transmitter is learned.
NOTE:
The system can store a maximum of 3 transmitter codes in memory.
METHOD 2
1)
Plug in the module. (Leave the ignition in the Off position).
2)
Press the lock button on each of the transmitters to be programmed.
3)
The park lights will flash once each time a new transmitter code is learned.
NOTE:
Previous transmitters that are not programmed at this time will deleted.
System Reset
Reset To Factory Default Settings.
1) Make sure ignition is in the OFF position.
2) Turn the ignition key ON -
leaving
key in the ON position.
3) Press the transmitter buttons as follows.
Trunk-Lock-Unlock-Trunk.
4) The system will respond by flashing the park lights three times*
*
The system is now set to factory default settings.
REMOTE VEHICLE KEYLESS
INSTALL MANUAL
PAGE 5
Quick View Programming
