Ultra Start KEU-300 Series, Инструкция по установке, Страница: 8 / 8

Setting #3- Park Light Output
Turn the ignition key “ON/OFF”, “ON/OFF” “ON”, press and release the
program switch
3 times. The LED will flash Three times to confirm setting
Three. Hold the program switch until the siren chirps the appropriate number
of times.
1 Chirp 30 Second The park lights will stay ON for 30 seconds when
the system is disarmed.
2 Chirps Light Flash Default Park light flashes
Setting #4- Car Jack Mode
Turn the ignition key “ON/OFF”, “ON/OFF” “ON”, press and release the
program switch
4 times. The LED will flash Four times to confirm setting
Four. Hold the program switch until the siren chirps the appropriate number
of times.
1 Chirp Car Jack Car jack Mode enabled
2 Chirps Default Car Jack Mode Disabled
Setting #5- Shock Sensor Delete
Turn the ignition key “ON/OFF”, “ON/OFF” “ON”, press and release the
program switch
5 times. The LED will flash Five times to confirm setting
Five. Hold the program switch until the siren chirps the appropriate number
of times.
1 Chirp Disabled Shock Sensor Disabled
2 Chirps Enabled Shock Sensor Active
Setting #6- Dome light/ Lock Output
Turn the ignition key “ON/OFF”, “ON/OFF” “ON”, press and release the
program switch
6 times. The LED will flash Six times to confirm setting Six.
Hold the program switch until the siren chirps the appropriate number of
times.
1 Chirp Passive Lock Output- Output 30 seconds after last door is closed
2 Chirps Passive Lock and Ignition Lock Output
3 Chirps Dome light Supervision Output- 30 second output on unlock
INSTALL MANUAL
REMOTE VEHICLE SECURITY
PAGE 8