background image

KE-5

                 Installation Manual

Setting 4 - Long Door Lock Pulse

(Factory Default Setting:  Pulse Off)

Long Door Lock Pulse

 means that the system can accommodate the factory

central locking systems of import vehicles having vacuum door lock actuators that
require a three-second lock pulse.
1 Turn the ignition on.  Ignition on means normal driving position.
2 Within 10 seconds, press and release the transmitter buttons

 Lock  Unlock  Trunk Lock

 in succession.

LONG DOOR LOCK PULSE MODE

 is confirmed with

 one

 parking light flash.

SHORT DOOR LOCK PULSE MODE

 is confirmed with

two

parking light flashes.

Setting 5 - Dual Unlock Pulse

(Factory Default Setting: Dual Unlock Mode Off)

Dual Unlock Pulse

 means that the system can accommodate the factory central locking

systems of import vehicles having dual unlock pulse to unlock the driver and passenger
doors.

1 Turn the ignition on. Ignition on means normal driving position.
2 Within 10 seconds, press and release the transmitter buttons

Unlock Trunk Unlock Lock

  in succession.

DUAL PULSE ON

 is confirmed with one horn chirp sound and

one

 parking light flash.

DUAL PULSE OFF

 is confirmed with two horn chirp sounds and

 two

parking light flashes.

Setting 6 - Passive Warning Chirp

(Factory Default Setting: Warning Chirp Off)

Passive Warning Chirp

means that in passive mode (4.1) the system gives soft

Warming chirp sounds during thirty second arming period after each temporary disarm.

1Turn the ignition on. Ignition on means normal driving position.
2Within 10 seconds, press and release the transmitter button

Lock Trunk Unlock Trunk

in succession.

CHIRP ON

is confirmed with one horn chirp sound and one parking light flash.

CHIRP OFF

is confirmed with two horn chirp sounds and two parking light flashes.

To Reset

all programmable features to factory default setting:

1 Turn the ignition on. Ignition on means normal driving position.
2 Within 10 seconds, press and release the transmitter button

Trunk Lock Unlock Trunk

in succession.

Reset to factory default is confirmed with three horn chirp sounds and three park

Light flashes.

 Setting 7 -Reset to Factory Default

Содержание KE-5









Отзывы: