*(Default Settings)
Menu 2 - Additional Settings
Ignition
ON-OFF-ON-OFF-ON
Press & Release
Program Button
Press
Button #2
Setting 1 Secure Valet Mode - Length of time required to set the system into Service Mode
1) Secure Valet
1 Flash/chirp
Hold the Program Button for 15 seconds
*2) Normal Valet
2 Flashes/chirps
Hold the Program Button for 5 seconds
Press & Release the Program Button 1 Time
(Setting 1) confirmed 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/sirenchirps, then release.
Press & Release the Program Button
to proceed to the next step
Setting 2 Parking Light/Trunk Output (White and Red/White on 14-pin)
1) 30 sec. Output
1 Flash/chirp
Park Lights on for 30 seconds when Unlock is pressed
2) Negative Park Lights
2 Flashes/chirps
Switches the Park Lights/Trunk Outputs
*3) Park Lights
3 Flashes/chirps
2 Park Light Flashes when Unlock is pressed
Press & Release the Program Button 2 Times
(Setting 2) confirmed 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 3 Horn chirp Timing (White/Blue on 4-pin)
1) 5 ms Pulse Output
1 Flash/chirp
Short(Quiet) Horn Output Pulses
2) 15 ms Pulse Output
2 Flashes/chirps
Long(Loud) Horn Output Pulses
*3) 10 ms Pulse Output
3 Flashes/chirps
Normal(Medium) Horn Output Pulses
Press & Release the Program Button 3 Times
(Setting 3) confirmed 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 4 Not Available
Setting 5 Siren/Horn (Automatic transmission only)
1) Horn Output (+)
1 Flash/chirp
Pulsed output for horn activation
*2) Siren output
2 Flashes/chirps
Constant output for siren activation
Press & Release the Program Button 5 Time
(Setting 5) confirmed 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/sirne chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 5 Reservation Mode (”M” units only)
1) Manual Reservation
1 Flash/chirp
Activate Reservation Mode by pressing Button #4
*2) Auto Reservation
2 Flashes/chirps
Activate Reservation Mode by pressing brake
Note: Menu 5 is specific to model number. Auto transmission modules with have the siren/horn
programmable and manual transmission will have the choice of auto or manual Reservation Mode.
Page 18
INSTALLATION MANUAL
REMOTE VEHICLE STARTER