Page 10
OWNER’S GUIDE
2WAY REMOTE STARTER/ ALARM
ATTENTION: TO AVOID SERIOUS INJURY, this remote start system must be set into
Service Mode before any under hood servicing is started. Service Mode will prevent
the vehicle from starting while the vehicle is being serviced. It is the sole
responsibility of the vehicle’s owner to place the system into Service Mode. The
manufacture accepts no responsibility for accidental starting of the vehicle while the
vehicle is being serviced.
Emergency Service Mode - (Valet)
This feature will disable the system except for locking and unlock functions.
This mode can also used if a remote is lost, damaged or if the system malfunctions.
ENTERING SERVICE MODE
1.Turn the ignition key to the “On” position then press and hold the Program Button on
the antenna for 5 seconds or until siren chirps
5 times.
EXITING SERVICE MODE
1.Turn the ignition key to the “On” position then press and hold the Program Button for 5
seconds or until the siren chirps
2 times.
Note: Remote starter functions will be disabled and the LED will be “on” steady.
The door locks and the trunk release will still be operational.
System Service Mode(Valet) - By Remote
This feature will disable the system from the remote transmitter. This feature must be
used when having the vehicle serviced. ( Oil change, Tune-up etc.)
ACTIVATE Service Mode
Press and release then press and hold button #4 for 5 seconds.
The park lights will flash and the siren will chip 5 times to confirm that the system
has entered Service Mode.
Note: Remote starter functions will be disabled and the LEDs will be “on” steady. The
door locks and the trunk release will still be operational.
DEACTIVATE Service Mode
Press and release then press and hold button #4 for 5 seconds.
The park lights will flash and the siren will chip 2 times to confirm that the system
has exited Service Mode.
Note: Remote starter functions will be disabled and the LEDs will be “on” steady. The
door locks and the trunk release will still be operational.
Service Mode