1
5
3
2
4
6
****
These connection’s are only necessary for installation’s on manual transmission
vehicles. Always install a “M” Series Remote Starter on manual transmission vehicles.
3 PIN
RED
PI
4
N
lue
B
ACTIVE RF ANTENNA
Status Led’s
Program Button
Note:
Do not use the center pin of this connector to power relay packs. Doing so will
damage the output. Always use a fused power source when installing relays for
keyless entry.
Starter
Heater
Power
Ignition 1
Jumper Selectable
Power
Note:
The antenna must be connected before the system will operate.
Page 3
Installation Guide
FCC/ID Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance void
the user’s authority to operate this devise.
