Pair the door contact to a BT remote control.
Remove the battery compartment cover from the remote control and also the door contact.
Next press and hold the learn buttons in both the remote and door contact, release when
you hear two beeps from the door contact, they are now paired together, if you have any
further remotes then repeat the above procedure.
Learn button
-------------------------------------------------------------------------------------------------------------------------
ARM
Press "3" on the keypad and you will hear one beep. 20 seconds later it is ARMED
DISARM
Enter the password and press "3". After one beep it is DISARMED.
Function setting:
(
To be done in the disarmed state)
Change password
In the "DISARMED" state, enter the password and press "3", red LED stays on for 3 seconds. Enter
the new password "xxxx" and enter "1223" again and press "3", the LED flashes 3 times. New
password is successfully set. ("xxxx" stands for the new password)
The new password cannot start
with a 3.
RF on/off
(Default is ON)
If you are using the MH107 as a standalone system this is not valid.
If you wish the door contact to work with other items in the BT system then you need to turn
this function on.
ON
Enter the password and enter "21111" to turn the RF function on. Red LED flashes 3 times.
OFF
Enter the password and enter "21112" to turn the RF function off. Red LED
flashes 3 times
Siren on/off
(Default is ON)
ON
Enter the password and enter "21211" to turn the siren on. Red LED flashes
3 times. When MH107 is triggered, the siren will sound.
OFF
Enter the password and enter "21212" to turn the siren off. Red LED
flashes 3 times. When MH107 is triggered, the siren will not sound
