WARNING!
This product is part of a personal fall
arrest system. The user must read and
follow the manufacturer’s instructions for
each component of the system. These
instructions must be provided to the user
of this product. The user must read and
understand these instructions before
using this product. Manufacturer’s
instructions must be followed for proper
use and maintenance of this product.
Alteration or misuse of this product, or
failure to follow instructions may result
in serious injury or death.
1
MODEL:
__________________________
SIZE: ____________________
DATE: ___________________
Anchorage:
The anchorage to which this product is attached must be
capable of sustaining a static load in the direction applied by the
personal fall arrest system of at least 3600 lbs. with certification of a
qualified person or 5000 lbs. without certification. When more than one
personal fall arrest system is attached to the same structure, the
strength requirements stated above must be multiplied by the number
of personal arrest systems attached to the structure.
Plan your personal fall protection system.
Before installing and using this equipment, consider all factors
affecting your safety during use of this equipment.
Warning:
Manufacturer's instructions supplied with this product at time of shipment must be
followed and provided to the end user. Failure to do so could result in serious injury or death.
Contact manufacturer if instructions are needed.
• Warnings and instructions must be read and understood before using equipment.
• Equipment must be used by trained personnel only.
• Users must understand all OSHA regulations, ANSI standards, and other relevant
regulations and standards pertaining to fall protection equipment.
This product is part of a personal fall arrest system; a fall arrest system is required if there is any
risk that a worker may fall from an elevated position. It is a requirement that the fall arrest system
be used any time a working height of six feet or more is reached. Working height is defined as the
distance from the walking/working surface to a grade or lower level.
This product shall require the user to have a rescue plan and the means at hand to implement it
when using the FBH for fall arrest. The following is recommended as part of fall arrest system.
A. Full Body Harness Material: Nylon
Note:
See additional instructions on buckle adjustment for proper fit. Maximum free-fall
distance six feet or maximum fall arrest force of 1800 lbs. Avoid lower level contact.
313H1
1.
2.
3.
4.
5.
6.
7.
1. Back 'D' ring is for fall arrest
2. Shoulder 'O' rings. (if present) are for
retrieval use only use locking snaps.
3. Side 'D' rings (if present) are for
positioning only.
4. Front 'D' ring (if present) are for falls
` greater than 24" with a maximum impact
of 900 lbs. Inspection card
5. Hip attachment elements are for work
positioning or travel restraint
6. Park lanyard here
7. Load indicator
These instructions are good for all 98 Series Alumi-Safe
& Custom designs with parachute buckles.
NOTE
USER INSTRUCTION MANUAL
DESCRIPTION:
PARACHUTE BUCKLE HARNESS
MODEL:
96305, 96307, 96305N, 96305FB, 96305F, 96305WS, PF-96305N,
PF-96305, UPF-96305, 96305NALK
MEETS OSHA & ANSI Z359.11-2014
1-800-850-5914
PHOENIX, AZ USA
WATCH VIDEOS 6, 12 & 25 ON ULTRASAFEUSA.COM
