14
5.3 Display
A
– Reset button
B
– Mode button
C
– Battery State-of-Charge
Indicator.
D
– Speedometer - displays in
steps of 0.1 km/h or 0.1 mph
E
– Odometer / Tripometer - displays km or miles pedalled,
this could be your total or your trip distance measured
to 10 meter or 0.01 mile.
- Switching between Odometer and Tripmeter
- Press the
Mode button B
- Reset Tripmeter
- Switch to TRIP and press the Reset button
A for 2 seconds.
- Setting km/h / mph
- Press the Reset button A and Mode
button B for more than 2 seconds to get in the setting
mode. Press the Reset button to switch between km/h
and mph. Press the Mode button for 2 seconds to return
to the normal mode.
Remember that there are power cut-off switches
embedded in the brake levers. When you apply the
brakes, power to the motor will turn OFF. Therefore, do not
hold the brake lever(s) when you want the motor to run.
Your A2B will provide instantaneous power whether you
are pedalling or not. Therefore, there is no need to pedal
as you start-up. However, the motor consumes more power
during a start from a standing stop than at any other time,
even more than climbing a hill. To conserve battery power,
and increase your range, pedal during a start from a
standing stop to relieve some of the load from the battery.
7.
Check out the handling and response of your A2B.
Familiarize yourself with how the suspension responds to
brake application and rider weight shifts.
