Statistics
Chapter 5: Operating Instructions
Page 5-44
VersaMux-4000 Operation & Installation Guide
Part No. 24001157
Revision C
Alarm-Stats
Selecting
Alarm-Stats
displays a list of the alarms, and the number of
occurrences of each, that have occurred since the last reset. In addition, you can
reset the alarm statistics after viewing them. See
the alarm descriptions.
Resetting the Alarm-Statistics from the Terminal Interface
shows how to reset the alarm statistics from the terminal interface.
Figure 5-31
Resetting the Alarm-Statistics from the Terminal Interface
Aggregate-Stats
Selecting
Aggregate-Statistics
displays the following:
•
Frame-Losses
- the number of frame losses
•
Tx-Frames
- the number of frames transmitted
•
Rx-Frames
- the number of frames received
•
Reset-Stats
- enables you to reset the aggregate statistics.