4
2) INSTALLATION OF MOTOR UNITS AND SUPPORT GUYS
Install the motor unit on the support by following instructions manual "Standard".
Fix the aluminium U holder (fig.4) above the ABS collars by means of the two bolts M6 x
120mm included in the screws kit.
Install the vertical stick on the U support (Figure 5) and secure it using the two M6
bolts. Fig. A shows the sectional view of the correct alignment of the parts including the
rope.
Fig.
4
Fig.
5
TIGHTENING BOLTS
Thread
Description
Clamping Nm
M6
Plates A (fig.1)
17 Nm
M6
Plates elements support lower
(fig.2)
10 Nm
M6
ABS collars lower tube (fig.3)
8 Nm
M6
Support “U” bolts (fig.4)
8 Nm
M6
Stick rope bolts (fig.5)
8 Nm
