Instruction Manual
The sensitivity of the product is most sensitive when the human body
moves vertically relative to the battery
APP
instructions
UIOT smart home APP remote control
1. Install UIOT smart home APP
Scan the qr code with your mobile phone to download the "UIOT smart home" APP,
or search for "UIOT smart home" in the APP market to download and install.
2. Add equipment
Premise: acquire UIOT intelligent server, power on and network;Power on the
device to be added.
Step 1: open and log into the UIOT "smart home" APP.
Step 2: enter "my" - "equipment management" - "+", find and click "Infrared Body
Sensor", according to the APP prompt, insert the card pin into the mesh hole
for 3 seconds and release.
Step 3: after setting the device name and room, complete the addition.
3. APP control
Through the "UIOT smart home" APP, you can:
1) Check the current device alarm and fault status.
2) Set the device state as the linkage trigger source to realize automatic control
of the device.
3) Pay attention to the system control, and then the APP of the system control
device will receive the notification.