Ultimate Support Sunken 6, Инструкция по эксплуатации, Страница: 6 / 8

Lay the left side board
down with the rack rail
facing up. Slide the top
and bottom board onto
dowel rods and cam pins.
On top and Bottom boards
make sure the cam locks
are facing the bottom of
the left side board.
Slide the right side board
into the top and bottom
boards. Place screw driver
into cam lock and turn
clockwise to lock cam pins
in place (12 Total).
NOTE:
If boards are not sliding
into place, check cam
locks. You may need
to turn them counter
clockwise for cam pin to
fall into place, then turn
clockwise to lock into
place.
Attach the short left and
right rack mount brackets
to the sides of the 6 space
rack cabinet with four pan
head screws (1/4 - 20 x
5/8
"
). Attach the long rack
mount bracket to the top of
the 6 space rack cabinet.
Use three more pan head
screws (1/4 - 20 x 5/8 " ) to
attach.
Repeat above steps for the
other 6 space rack cabinet.
Top
Board
Bottom
Board
Right Side
Board
Left Side
Board
Rack Rail
Short Rack Mount
Bracket (Left)
Long Rack Mount
Bracket
Short Rack Mount
Bracket (Right)
6 Space Rack
Cabinet Assembled
Cam Locks
Cam Locks
Cam Pins &
Dowel Rods
Cam Pins &
Dowel Rods
Pan Head Screws
(1/4 - 20 x 5/8
" )