Page 6
STEP 4A
– Adjust Level
Utilizing the leveling bubble, ensure end clamp is level. If desired,
arms can be adjusted to desired angle, in or out of center, by
loosening Z-knob, adjust to desired angle, then tighten.
STEP 4C
– Adjust Angle
Adjust angle of support arm by loosening z-knob, adjust to
desired angle, then tighten.
STEP 4B
– Set Height
Set and/or change height by installing memory collar at desired
height (use included allen wrench to tighten).
STEP 4 – Adjust Angles
and Height