STEP 1
Place the GS-10 Pro wall mount on wall
at your desired location. For maximum
safety for your guitar, please make sure
mount is level (bubble level pictured
above for illustration).
STEP 2
Using either a pencil or one of the
screws provided, mark the walls
where holes will be drilled.
Level
(4) Plastic Anchor
(#6 x 1-1/4 in.)
Slat Wall
Slat Wall
3/16
"
Drill Bit
STEP 1
Making sure the lip is in the lower slat, place
GS-10 Pro slat wall mount on slat wall.
STEP 3
Using a 3/16
"
drill bit, drill
holes for anchors.
STEP 4
Place #6 x 1-1/4 in. plastic anchors
in holes. If needed, lightly tap in
anchors with hammer.
STEP 5
Line up holes on wall with holes
in mount. Secure with Phillips
head screwdriver / drill gun.
STEP 2
Line upper lip of GS-10 Pro hanger with upper
slot of mount. Push flush with wall, making sure
the two mount shelves line up in hanger slots.
(NOTE: Same instructions for 3
"
or 4
"
slats.)
STEP 6
Line upper lip of GS-10 Pro hanger with upper
slot of mount. Push flush with wall, making sure
the two mount shelves line up in hanger slots.
MOUNTING TO DRYWALL
MOUNTING TO SLAT WALL
For 4
"
Slats
For 3
"
Slats
Mounting
Shelves
Mounting
Shelves
Hanger
Slots
Hanger
Slots