ULTIMATE SPEED 97432-7, Инструкция по использованию и правила безопасности

Страница: 4 / 44

Fitting:
1. Take the car cover out of the storage bag.
2. Make sure which part goes on the front of the
vehicle!
 You can identify the front by the sewn-on
label with the word "FRONT" on it.
3. Remove the strap by opening the click fasteners.
4. Fold in wing mirrors if possible.
5. Attach the car cover to the front of your vehicle
by using the sewn-in rubber strip.
6. Pull the car cover over the vehicle (Figure 1).

Attention:
If your vehicle has a rod
aerial at the rear, please unscrew it. Please
push in telescopic aerials.
Please carefully push down any aerials in the
front roof area and lay them parallel to the
roof. Make sure not to damage the aerial or
the paintwork!
7. Now attach the car cover to the rear of your
vehicle by using the sewn-in rubber strip.
8. Then fasten the strap at the front and at the back
of the vehicle. Fasten the strap with the help of
the clip on one side, grab the strap by the other
end, circle the vehicle and pull the strap under
the front and the back. Now fasten it on the other
side of the vehicle using the second clip (fig. 2.1
(front) and 2.2 (back)) and pull the strap tight
(fig. 3.1 (front) and 3.2 (back)).
314971_LB7_GB_CY_HR_RO_BG_GR_DE_AT_CH_Autovollgarage_190306.indd 4 20.03.19 09:24