6. Pull the car cover over the vehicle (Figure 1).
Attention:
If your vehicle has a rod aerial at the rear,
please unscrew it. Please push in telescopic aerials.
Please carefully push down any aerials in the front
roof area and lay them parallel to the roof.
Make sure not to damage the aerial or the paintwork!
7. Now attach the car cover to the rear of your vehicle by
using the sewn-in rubber strip.
8. Lastly attach the strap on one side with the clip, pull the
strap under the vehicle, attach it to the second clip and
pull the strap tight (Figures 2+3).
Removal:
1. To remove the car cover please follow the procedure in
reverse order.
Maintenance:
Please clean the car cover by hand with lukewarm water as
required. To avoid damage to the coating, do not use any
cleaning agents.
Store the car cover in a dry, well-ventilated and cool location.
97419-2X-LIDL-IM-V01-LB2-OEF.indd 8
01.03.16 09:10