Page
6
of
12
3. Cleaning Instruction
Always remove the board from the bath and remove the brackets before
cleaning. All parts should be cleaned periodically. Use a non-abrasive mild
detergent along with warm water & a soft cloth to clean the step. Rinse with
clean warm water & a soft dry cloth. If disinfecting is required, a mild disinfectant
that will not cause damage to plastics should be used.
CAUTION:
•
Do not use any form of abrasive cleaner, cloth or sponge with this
product as this could cause damage to the product. Strong acid,
alkaline or products containing these chemicals may cause damage
or discolouration to the product and should not be used.
•
Autoclave cleaning is
NOT
recommended, as this can cause damage
to the plastics used in the construction of the bath board.
NOTE:
•
After cleaning or disinfecting, all the parts should be showered down
or wiped over with a damp cloth
before
the bath board is used on the
bath again.