34
67.
Start the latest version of Cura,
Go to Machine -> Machine settings
Then press add Machine. You will be presented with this
screen.
Make sure USB cable is connected between the printer
and the computer running Cura.
70.
Upgrade the firmware. This step is important
because it activates the Heated bed functions in the
Marlin firmware.
68.
Select Ultimaker Original and press next.
71.
Run the machine checks to see if everything is
installed propperly.
69.
Select the upgrade parts that you installed.
72.
Run the Bed leveling wizzard.
First you need to roughly set the distance of the Z-stop.
Use the Up/Down buttons to position the bed upto the
nozzle. Then screw the Z-stop into place.
Press Resume and calibrate the bed with the 3 thumb
screws.
Now the wizard will print a couple of squares
Check if the lines of the square are spaced evenly next
to each other.
