Ultenic T10, Руководство пользователя, Страница: 26 / 32

Maintenance and Care
Your Robot is designed to be used regularly. As with most floor care devices, regular use may cause
build-up around brushes, in debris compartments and near filters. We recommend performing
regular maintenance, as outlined in the following pages, to keep your Robot running at optimal
performance.
�. Recommended Care/ Replacement Frequency
PART
Rolling brush
Side brush
Filters
Sensors
Charging contacts
Omnidirectional wheel
CARE FREQUENCY REPLACEMENT FREQUENCY
Once per week
⸺
⸺
⸺
Every 3-6 months
Every 2 months
Every 6-12 months
Once per week
Once per week
Once per month
Once per month
Once per month
�. Maintaining Rolling Brush
Pinch the left and right tabs on the
rolling brush cover. Lift and remove the
cover.
Remove the main brush and clean with
included cleaning tool as seen in the
figure below.
�. Maintaining Side Brush
Note:
It is recommended to replace the side brush every �-� months depending on use.
Use a Philips screwdriver to unscrew
the side brush screw and remove the
side brush.
Remove dirt and debris and reinstall
using Philips screwdriver.