www.ultega.net
7
US
ASSEMBLY STEP
Step 1
•
Attach the front stabiliser (3) to
front curve plate of main frame (1)
using 2 x carriage bolts (13), acr
washers (21) and cap nuts (23).
•
Attach the rear stabiliser (2) to
rear curve plate of main frame (1),
using 2 x carriage bolts (13), arc
washers (21) and cap nuts (23).
Step 2
•
Take the front post (5) and connect
the middle sensor wire (19) with lower
sensor wire (25).
•
Release the tension knob with upper
tension cable (24) on the front post (5)
then connect with the lower tension
cable (14).
•
Insert the front post (5) into the main
frame (1) and tighten with 4 x allen
bolts (15) and curve washers (21).
13
3
2
13
23
21
1
21
21
23
23
14
24
1.
14
24
2.
3.
14
25
19
24
21
15
15
21
5
