Safety intructions - Please read this manual carefully before your intial startup
CAUTION! TAKE CARE USING THIS DEVICE
RISK OF ELECTRIC SHOCK
Each person involved with the fitting, maintenance and operation of this device should be competent and follow
these instructions.
Before Initial start-up check the mains cable and device for any damage.
Should the fuse in the plug need replacing ensure a 3amp fuse with a British kite mark is used.
ULS manufacturing will not accept liability for any damages caused by the non-observance of this manual, or any
modification to this device.
Never remove warning or information labels.
Do not open this device or modify the equipment
Do not connect this device to a dimmer pack.
Do not switch this device on and off at short intervals.
Make sure the voltage is between 90 and 240v ac
Make sure the power cable is never crushed or forced, check the cable periodically.
If the equipment has been exposed to drastic temperature change (normally after transportation), allow device to
reach room temperature before powering on.
Do not touch this device during a thunderstorm.
If any of the following conditions occur, remove the ac plug:
Smoke or unusual smell.
Water or foreign objects inside the unit.
Damage to the housing caused by physical damage.
Never pull the power cord, always grasp the main body of the plug top.
Thank you for purchasing our premium Led Batten.
