Ulma BMK-170, Руководство пользователя

Страница: 31 / 76


31


BMK CLIMBING BRACKETS
3. ASSEMBLY, USE AND DISMANTLING
Allow for an adequately sized and level working area to ease the correct assembly of the climbing system.
Subsequently, general guidelines for the assembly, use and dismantling of the system are described in detail.
3.1. Instructions for the Climbing Bracket BMK system: First pouring stage on the
ground
1. Assemble the formwork panels according to the instructions given below.
2. Fix the vertical walers to the formwork making sure that the distance between the walers is the same as the
one between the cones. Bolt the walkway bracket onto the vertical walers to complete the platforms. The
position of the platforms on the vertical waler depends on the pouring height.
3. Lift the structure and position it in the indicated location.
4. Place Base Plates and Push-Pull Props to plumb the formwork panel. Fasten the Base Plates. Do not let go of
the panel with the crane until having anchored the formwork properly to the ground. Position the anchor
cones to support the climbing system during the next pouring stage according to the indications in the
assembly drawings.
5. Apply release agent and place the steel reinforcement.
6. Position the rest of the formwork panels.
7. Place tie rods along the rows of walers and pour the concrete according to the project.
8. Remove the tie rods and proceed with stripping by adjusting the push-pull props. Before actually removing the
panels, place the climbing rings onto the cones from the concrete pouring platform. Remove the panels.