OPERATING INSTRUCTIONS
F i g. 1 Control Panel Vi e w F i g. 2 Remot e Cont rol Panel
Vi ew
Place the heater on a firm level surface free from obstructions, and at least
3 ft. away from
any wall and any other objects such as furniture, curtains, plants or combustible material.
With the
Power Switch
“A”
in the
”OFF
” position, plug the heater into a grounded 120V outlet.
Turn the heater ”
ON
” and “
OFF
” by pressing the
Power Switch “A” .
•
To operate heater in heating setting, press
HEAT
button.
•
To use heater in fan only setting, press
FAN
button. Press once again to cancel fan only
setting.
•
To heat a wide area of space it is advisable to use the oscillation feature .To use the heater
in oscillation mode, first make sure the heater is on
HEAT
or
FAN
mode .Press once again
to switch the oscillation feature off.
•
Temperature setting:
When the heater is on, press
“Up”
or
“Down”
key and the Temperature will is switched circularly
in sequence of 65
o
F.-70
o
F.-75
o
F.-80
o
F.-85
o
F. (75
o
F is the ex-factory setting).
Note: Heater will continue working in 10 —30 seconds in order to blow out the hot
air inside the unit. Finally remove the plug from the socket.
Control
Panel
Remote control: This heater has a 6 keys remote with the following function
(See
F i g. 2
) :
1.
ON/OFF:
Power switch key, used to turn the heater on when plug in or turn off the
heater when the heater is under working.
2.
OSC
: Oscillation switch, used to enable the oscillation function by pressing once. To
UNPACKING AND SET-UP
Unpack your heater and remove the wheel assemblies from the package.
1.
Make sure the heater is unplugged and in the
”OFF”
position.
2.
TURN THE HEATER UPSIDE DOWN
. Un-fasten the four screws.
3.
Position the two holes assemblies of the two half bases and fix them as shown.
4.
Insert each U-shape screw into the holes of base.
5.
Insert the butterfly nuts and screw them tightly.
6.
Turn the heater upright.
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least one time during the operating season in
order to provide the optimum level of performance.
ALWAYS TURN THE POWER SWITCH
OFF AND UNPLUG THE HEATER BEFORE CLEANING.
Be sure to save the box for off-
season storage.
IMPORTANT!
Your heater is equipped with a
polarized alternating current
line plug (a plug having one
blade wider than the other).
This plug will fit into the power
outlet only one way. This is a
safety feature. If you are
unable to insert the plug fully
into the outlet, try reversing
the plug. If the plug should
still fail to fit, contact your
electrician to replace your
outlet.
DO NOT
defeat the
safety purpose of the
polarized plug.
Carry Handle
（
Behind
）
C
B
HEAT
UP
ON&OFF
FAN
DOWM
OSCILLATION
Fig.1 Control Panel Functions
A
C
B
Oscillation Switch
Power Switch
Heat Mode
A
Содержание PELONIS HC-0128H
Страница 4: ......
