Ukoke UTE01, Руководство пользователя

Страница: 18 / 20

FIG T
2. Snugly and evenly wind the line onto the spool in the direction of the arrow on
the spool (FIG T) , until the line builds up to the notches in the spool rim. Do
not overfill spool. The spool holds about 6.5 m of line .
CLEAN AND STORAGE
1. After use, remove the battery pack from the trimmer;
2. When not in use store the machine out of the reach of children;
3. Use only manufacturer recommended replacement parts and accessories;
4. To clean the tool, remove battery pack and use only mild soap and a damp cloth to clean
the tool. Do not immerse tool in water or squirt it with a hose. Do not allow any liquid to
get inside it. Do not clean with a pressure washer.
TROUBLESHOOTING
1. Tool runs slowly
- Check that the spool housing can rotate freely. Carefully clean it if necessary.
- Check that the cutting line does not protrude more than 9 cm from the spool housing. If it
does, cut it off so that it just reaches the line trimming blade.
2. If the trimmer is not cutting properly
- Check the condition of the cutting head, if the cutting line is too short or cutting head
damaged.
- Note: Do not use damaged cutting head.
3. If trimmer will not operate
- Check battery pack assembly;
- Charge the battery: operation of the grass trimmer is dependent upon sufficient charge in
the battery pack.
4. If the battery will not charge
- Check to see if the battery is properly inserted into the charger base, and make sure the
indicator light is on. If not, check the power supply to the socket used for charger plug.
5. If a fault is suspected return the trimmer to an authorized dealer for repair.
TECHINICAL DATA
Grass trimmer
UTE01
Voltage
No-load speed 8000 /min
Cutting width 230mm
Line diameter 1.6mm
Battery ET-D1809
Battery type
Lithium-Ion
Battery voltage
Battery capacity 2.0
Ah
20V
20V
16