OUTLET A Instruction.indd 3
3/8/17 3:31 AM
1.
Initial Setup
1.1
Reset the timer
Use a paper clip to press the ‘RESET’ button to clear
all settings. The LCD will display information as shown
in ‘Figure 1’ and automatically enter the ‘Clock Mode’
as shown in ‘Figure 2’;
1.2
Charge the timer
If the screen is blank, plug the timer into any outlet
for 30 minutes to charge the internal battery
1.3
Understand the working priority
Priority: Manual ON/OFF > Random > AUTO
That means:
•
If you set manually
ON
, then it will override Random
function and the timer programming setting. The
timer always has output.
•
If you set manually
OFF
, then it will override Random
function and the timer programming setting. The
timer always has no output.
•
If you set the timer to
AUTO
mode and the
RANDOM
function is on, then the timer will randomly come on
and go off up to half an hour earlier/ later than the
assigned on/off programming setting(please ref to
session 6 Anti-theft Random Function).
•
If you set the timer to
AUTO
mode(without RANDOM
feature turns on), then the timer programmed setting
will run.
