Ukcutter SMURF HW1200, Руководство оператора

Страница: 18 / 27

f. Setting the origin
You can set the absolute origin of the media to the lower right corner, or any other position,
by using the up/down and left/right keys to move to the preferred position. Then press
“Origin” to clear the current coordinates and set the current position as the new origin for
cutting.
g. Media test strip debugging
Locate the position of carriage and media, press "Test" button, the machine will automatically
cut out a square and triangle, and tear-out the test strip by hand, if can be easily opened, and
not carved through the adhesive, indicating that debugging is good, if tear-out with the
associated media, you need to increase the blade pressure or adjust the knife extended tip,
then continue to press "Test", the machine will automatically cut the left side of the original
location of test strips, you need to do this before you testing well.
6. FLEXI software installation
Load FLEXI CD, open files and click “Autorun.exe” to install the software. Please don't connect
the dongle to the computer during installation, to avoid conflict with the dongle driver.