background image

3m - series



Professional Prime

- 2 -

It is always recommended that you secure your tent properly with storm straps and ground pegs when you

put up the structure. Proper Anchoring system selection is your responsibility. Heavy duty Anchor are sold

separately and are not included in this product.

Periodically check the anchors to ensure stability of shelter.

In case of extreme weather conditions, the tent cover must be removed.

Any shelter that is not anchored securely has the potential to fly away causing damage. We are not

responsible for any shelter that blows away.

This canopy is intended to protect against the effects of sun, rain, light snow, etc. It is not designed to hold

the loads that can accompany wind, rain, snow or ice storms. This structure is not tested for specific snow,

rain and wind loads.

Do not use open fire, welding equipment or other ignition sources in the tent.

EN: Cleaning and Storage

A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can
accelerate deterioration of cover fabric.

Immediately remove any accumulated water, snow or ice from the roof structure.

DO NOT use bleach or harsh abrasive products to clean the fabric cover. Cover is easily cleaned with
mild soap and water.

EN: Safety Instructions

Please use gloves and stable shoes when assembling the metal frame portion of this unit. The metal

components may have sharp edges and be oily cause of the metal processing.

Snow must be removed from the tarpaulin in a timely manner. Temporary accommodation as tents should

be taken down in adverse weather condition like heavy wind, snowfall and ice.

Ensure sufficient distance of the tarpaulin to heat sources, electrical-, gas- and other pipes (min. 1.2m). You

can obtain detailed information from your responsible authority.

Pay attention to the following points when choosing a location:

The pavilion must stand on a flat, non-slip and safe place

choose a sheltered location

Avoid damage to the material, please place the pavilion so that it cannot rub or chafe on

branches,

parts of buildings etc.

Put up the pavilion at a safe distance to fireplaces and pay attention to the direction of the wind

Leave your pavilion to dry in an erected position before packing it away.

Assembly Instructions

Содержание Professional Prime 3m Series









Отзывы: