Wireless Power Switch (US)
Installation Guide
4
3
2
1
Overview
Name: Wireless Power Switch (US)
Power: 100~120VAC
Dimension: 82 x 59.5x 53.7mm
Features
Home Automation – receive the Gateway’s issued ON/OFF signal wirelessly, then control the power outlet for power supply. It
can easily operate the home appliances, even by using a mobile device.
Easy Setup – simply press the SET button on the device to join the system.
Switch Link – when linked with other sensors, users can configure the action to be taken when the linked sensor is triggered.
For example, if someone triggered the Contact Sensor, the Power Switching will automatically turn ON/OFF. It is suitable to be
used as a power switch to control the corridor night auxiliary lighting.
When linked with other home appliances, press the ON/OFF button to manually turn on/off the power relay. (The Red light
indicates the power is ON)
Equipped with a router function which enables the system to extend the wireless signal distance and lets other sensors join the
system via its connection.
Easy to monitor the power consumption of home electronic appliances for energy saving.
Names of Parts
1. Antenna
2. Triplex Outlet
3. Power Plug
4. ON/OFF Button
5. Status LED
6. SET Button
6
5
82mm
53.7mm
59.5mm
WPW-220A
IV. Device Deletion
(Back to factory default settings)
1. First, Login into website.
About Login methods, please refer to
4. Basic Setting
of
Installation
in
Wireless Gateway Installation Guide
. (Page1).
2. To remove the device joining, pull out the device, long press SET button at the bottom of the device about 10 seconds. Plug in
the device to the wall outlet again and wait 5 seconds. (Please see next page to continue the procedure.)
Installation
I. Before Installation
1. Power on the Gateway.
2. Waiting for about 90 seconds until the Gateway led light become solid green instead of blinking.
Note:
We suggest to use auto joining all device via APP at the first time. Please refer to
APP Quick Installation Guide.
II. Device Installation and Manual Joining
1. Plug in the device to the wall outlet.
2. Short press the SET button at the top of the Gateway or at the bottom of Router (another Power Switching).Then short press the
SET button on the device
3. The Gateway/Router and the device are joining as both LED indicators blink (around 30 seconds). Wait for few seconds until both
LED indicators are turned off, indicating the device Joining process is successful.
Note:
If the device Joining process is failed, both LED indicators on those joined devices will light blue once after blinking.
4. To switch on the power, simply press the ON/OFF button. (The red light indicates the power is ON)
III. Device Usage
Power Meter: Plug the home appliance on the Power Switch. Then it can calculate the Voltage(V), Current(A), Power(W),
Frequency(Hz) when the device is switched ON. (The minimum Watt will appear after the device is switched on for at least 1 hour)
Energy Used Cost: Configure the unit cost at peak time and off-peak time by Web interface first, and then select the accumulate
period (by month, the maximum is 3 months). The system will automatically calculate the Total Cost, Peak Time Cost, and
Off-Peak Time Cost. (The earliest period is 1 year ago)
The power meter value and cost value can be viewed on the web interface and APP.
