4. Join to link with Gateway, please reference user manual of WCC-110 (Wireless console
controller).
5. Foundation stop plate can be fixed on the pillar approach, the fixed as follows plans:
Troubleshooting:
1. Problem
:
When link with WR-110 (Wireless repeater), there is no display of LED
indicator
light for WAT-110 (Wireless AI Transducer) to flash two or three times.
Solution
: a. .Need to confirm with the industrial control instrumentation of the 4 ~ 20mA
signal loop lines connected to a good wiring is correct and there is 4 ~ 20mA
signals, the supply of electricity.
b. May be not press set button, need to link with repeater again.
c.
If the above handles are invalid, please contact with
agency.
2. Problem
:
Unable to link with WR-110 (wireless repeater).
Solution:
a. It needs to confirm the distance between WAT-110 (Wireless AI Transducer)
and WR-110 (Wireless repeater). Wireless connects in non-camouflage straight
line effective range 10 meters. May pull closer between both distance test to have
a look first, whether to have the improvement segment condition.
Specification:
Wireless AI Transducer
Model No.
WAT-110
Electrical Specification
Transmit Frequency
2.4GHz
Modulation
GFSK
Transmit Power
0 dBm
Channel spacing
1 MHz
Channel NO.
81 Channel(2401~2481Mhz)
Range of operation
10 meters
Operating voltage
3.0V DC (Power from Current Loop)
Current (typical)
Working: 14mA Peak
