Notice
Please install the device in a well-ventilated location.
Do not expose to direct sunlight, heat or high humidity.
Avoid wet from rain.
Install the batteries with the correct polarity (+/-) as shown inside the battery compartment.
Troubleshooting
Problem
Solution
The LED indicator lights abnormally
when linking to the system.
Cannot link to the system.
a. Make sure the battery has been properly installed and its power is adequate.
b. Reset to factory default (Please see
Installation
,
III. Device Deletion
), and
re-join to the system.
c. If the problem persists, please contact your local distributor.
Check the distance between device and Gateway/Router (line of sight) is 80
meters (max). If there is any obstructions (i.e. walls or metal objects) between the
devices, the distance will be shorter. Users can move the device closer or add a
Router, then try again.
Specifications
Wireless Temperature & Humidity Sensor
Communication Protocol
Frequency
Operation Range
Power Consumption
CPU
LED Indicator
Temperature Accuracy
Humidity Accuracy
Battery Type
Battery Life
Low battery life
Environmental
Specification
Dimension (W x H x D)
Weight
Zigbee Pro ZHA1.2
2.4 GHz ISM band
Up to 80 meters (LOS)
Working: max 38mA
Standby: max 3uA
JN5169
Blue 1PCS LED
Status: Trigger LED Flash
Join LED Flash
±0.5
℃
±5RH
CR123A Battery (3V) x 1
Up to 2 years
3 Weeks
Operating Temperature 0°C ~ 40°C
Storage Temperature -20°C ~ 70°C
Humidity
90% RH Max, Non-Condensing
21 x 69 x 23.5mm
(w/o Battery) 14g
RF exposure warning statement
