MSR213V Simple Manual
2010-09-06
INSTALLATION
1. Insert USB connector to a free USB port on the PC system.
2. The first time Windows will prompt you to install a device driver for the
device.
3. After the USB driver is installed, the LED of MSR213V will turn green
indicating that the device is ready to use.
For MSR213V USB driver, please contact UIC local representative or sales
office.
CARD READING
To exhibit the card reading capabilities, any serial communication program that
can transmit and receive serial data such as “Microsoft HyperTerminal” can be
used.
SPECIFICATIONS
Recording Method
Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA
Swipe Speed
5 to 55 inch/sec (worst case with +/- 15% jitter card)
Power Requirements
+5VDC, +/-5%
Communication
Compatible with USB specification Revision 2.0
Operating Temperature
-10
°
C to +55
°
C
Operating Humidity
5% to 95% relative humidity
Body Material
ABS 94V-0
Cover and Cable Color
IBM 43-4208 pearl white or black (optional)
Magnetic Head Life
Min. 1M swipes
Dimensions
100L x 34W x 26H mm
Weight Approx.
120g
USB Identification Info.
Vendor ID: 6352h/ Product ID: 213Dh
Connector
USB series “A” plugs
DATA OUTPUT FORMAT
PPC TK1 Prefix
TK1 Data TK1 Suffix
TPC
PPC
Separator
TK2 Prefix TK2 Data TK2 Suffix TPC
PPC
Separator
TK3 Prefix TK3 Data TK3 Suffix TPC
NOTE:
PPC
is preceding protocol code and
TPC
is terminal protocol code. The
prefix
and
suffix
of each track and
separator
are optional.
TKx Data: SS(optional) + Track Data + ES(optional) + LRC(optional)
NOTICE: The issuer of this manual has made every effort to provide accurate information. The issuer should not be
held liable for any technical and editorial omission or errors made herein; nor for incidental consequential damages
resulting from the furnishing, performance or use of this material. This document contains proprietary information that
is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or
translated without the prior written consent of the issuer. The information provided in this manual is subject to change
without notice.
PM084-S Revision A
2
